Base and Treble Amplifier Controls
Run the Base and Treble MicroSim
Edit the Base and Treble MicroSim
I would like to create a p5.js simulation of the frequency
response of an old classic amplifier with base and treble knobs.
Instead of knobs, use two sliders at the bottom of the canvas,
one for base and one for treble.
The sliders should start out in the middle.
Use the width-responsive.js MicroSim rules.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45 | // region drawing parameters
// the width of the entire canvas
let canvasWidth = 400;
// The top drawing region above the interactive controls
let drawHeight = 400;
// control region height
let controlHeight = 50;
// The total hight of both the drawing region height + the control region height
let canvasHeight = 450;
// margin around the active plotting region
let margin = 25;
// larger text so students in the back of the room can read the labels
let defaultTextSize = 16;
function setup {
const canvas = createCanvas(canvasWidth, canvasHeight);
// canvas.parent('canvas-container');
var mainElement = document.querySelector('main');
canvas.parent(mainElement);
textSize(defaultTextSize);
// create a new slider at th bottom of the canvas
mySlider = createSlider(0, 100, 50, 1);
mySlider.position(sliderLeftMargin, drawHeight + 12);
mySlider.style('width', canvasWidth - sliderLeftMargin - 20 + 'px');
}
function draw() {
// make the background drawing region a very light blue
fill('aliceblue');
rect(0, 0, canvasWidth, drawHeight);
// make the background of the controls area white
fill('white')
rect(0, drawHeight, canvasWidth, controlHeight);
// get the updated slider value
val = mySlider.value();
// put your custom code here
// draw label and value
text("MySlider: " + val, 10, drawHeight + 25)
}
|
Response
ChatGPT o1-preview Thought for 52 seconds
Certainly! Below is the modified p5.js code that simulates the frequency response of a classic amplifier with bass and treble controls using two sliders. The sliders start in the middle and adjust the bass and treble settings. The frequency response is plotted on the canvas, showing how the settings affect the amplifier's output.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125 | // region drawing parameters
// the width of the entire canvas
let canvasWidth = 400;
// The top drawing region above the interactive controls
let drawHeight = 400;
// control region height
let controlHeight = 80;
// The total height of both the drawing region height + the control region height
let canvasHeight = drawHeight + controlHeight;
// margin around the active plotting region
let margin = 25;
// larger text so students in the back of the room can read the labels
let defaultTextSize = 16;
let bassSlider, trebleSlider;
function setup() {
const canvas = createCanvas(canvasWidth, canvasHeight);
var mainElement = document.querySelector('main');
canvas.parent(mainElement);
textSize(defaultTextSize);
// Define slider left margin
let sliderLeftMargin = margin;
// Create bass slider
bassSlider = createSlider(0, 100, 50, 1);
bassSlider.position(sliderLeftMargin, drawHeight + 12);
bassSlider.style('width', canvasWidth - sliderLeftMargin - 20 + 'px');
// Create treble slider
trebleSlider = createSlider(0, 100, 50, 1);
trebleSlider.position(sliderLeftMargin, drawHeight + 12 + 30);
trebleSlider.style('width', canvasWidth - sliderLeftMargin - 20 + 'px');
}
function draw() {
// Set background color
background('white');
// Fill the drawing region with 'aliceblue'
fill('aliceblue');
noStroke();
rect(0, 0, canvasWidth, drawHeight);
// Fill the control region with 'white'
fill('white');
rect(0, drawHeight, canvasWidth, controlHeight);
// Get the updated slider values
let bassVal = bassSlider.value();
let trebleVal = trebleSlider.value();
// Normalize the slider values to range -1 to 1
let bassAmount = (bassVal - 50) / 50;
let trebleAmount = (trebleVal - 50) / 50;
// Define frequency range and number of points
let numPoints = 500;
let freqMin = 20;
let freqMax = 20000;
// Define EQ parameters
let f_bass_cutoff = 500;
let f_treble_cutoff = 2000;
let n = 4;
let maxGain = 12; // dB
let gainMin = -15; // dB
let gainMax = 15; // dB
// Begin shape for plotting the frequency response curve
noFill();
stroke(0);
beginShape();
for (let i = 0; i < numPoints; i++) {
let fraction = i / (numPoints - 1);
let freq = freqMin * Math.pow(freqMax / freqMin, fraction);
// Compute lowShelf and highShelf
let lowShelf = 1 / (1 + Math.pow(freq / f_bass_cutoff, n));
let highShelf = 1 / (1 + Math.pow(f_treble_cutoff / freq, n));
// Compute gains
let bassGain_dB = bassAmount * maxGain * lowShelf;
let trebleGain_dB = trebleAmount * maxGain * highShelf;
let totalGain_dB = bassGain_dB + trebleGain_dB;
// Map frequency to x position
let x = map(
Math.log10(freq),
Math.log10(freqMin),
Math.log10(freqMax),
margin,
canvasWidth - margin
);
// Map gain to y position
let y = map(totalGain_dB, gainMin, gainMax, drawHeight - margin, margin);
// Plot the point
vertex(x, y);
}
endShape();
// Draw axes
stroke(150);
// x-axis at y = gain 0 dB
let yZero = map(0, gainMin, gainMax, drawHeight - margin, margin);
line(margin, yZero, canvasWidth - margin, yZero);
// Draw labels for frequencies
fill(0);
textAlign(CENTER, TOP);
text("Frequency Response", canvasWidth / 2, margin / 2);
// Draw labels for sliders
textAlign(LEFT, CENTER);
fill(0);
text("Bass", bassSlider.x + 5, bassSlider.y - 10);
text("Treble", trebleSlider.x + 5, trebleSlider.y - 10);
}
`
|
Explanation:
-
Sliders Creation: Two sliders, bassSlider and trebleSlider, are created in the setup() function. They are positioned one below the other in the control area at the bottom of the canvas.
-
Slider Values Normalization: The values from the sliders are normalized to a range of -1 to 1 to represent the adjustment from minimum to maximum gain.
-
Frequency Response Calculation: The frequency response is calculated using shelving filter approximations for bass and treble adjustments. The gains are computed based on the slider positions and applied to low and high-frequency ranges.
-
Plotting the Curve: The frequency response curve is plotted using beginShape() and vertex(). Frequencies are mapped logarithmically to the x-axis, and gains in decibels are mapped to the y-axis.
-
Axes and Labels: Axes are drawn to represent 0 dB gain, and labels are added for clarity. The labels for the sliders are positioned above them.
Note: This code should be run in a p5.js environment. The canvas size and control regions are set according to the template provided. Adjustments can be made to the EQ parameters to simulate different amplifier characteristics.
Refinement of Placement of Sliders
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138 | That was perfect. Now, please place the base slider
on the left and the treble slider on the right.
Place the labels under the sliders.
## ChatGPT Response
ChatGPT o1-preview Thought for 31 seconds
Certainly! Below is the updated p5.js code with the bass slider placed on the left and the treble slider on the right, with labels positioned under the sliders.
```javascript
// region drawing parameters
// the width of the entire canvas
let canvasWidth = 400;
// The top drawing region above the interactive controls
let drawHeight = 400;
// control region height
let controlHeight = 80;
// The total height of both the drawing region height + the control region height
let canvasHeight = drawHeight + controlHeight;
// margin around the active plotting region
let margin = 25;
// larger text so students in the back of the room can read the labels
let defaultTextSize = 16;
let bassSlider, trebleSlider;
function setup() {
const canvas = createCanvas(canvasWidth, canvasHeight);
var mainElement = document.querySelector('main');
canvas.parent(mainElement);
textSize(defaultTextSize);
// Define slider left margin
let sliderLeftMargin = margin;
// Define slider width (half the canvas width minus margins)
let sliderWidth = (canvasWidth - 3 * margin) / 2;
// Create bass slider on the left
bassSlider = createSlider(0, 100, 50, 1);
bassSlider.position(sliderLeftMargin, drawHeight + 12);
bassSlider.style('width', sliderWidth + 'px');
// Create treble slider on the right
trebleSlider = createSlider(0, 100, 50, 1);
trebleSlider.position(sliderLeftMargin + sliderWidth + margin, drawHeight + 12);
trebleSlider.style('width', sliderWidth + 'px');
}
function draw() {
// Set background color
background('white');
// Fill the drawing region with 'aliceblue'
fill('aliceblue');
noStroke();
rect(0, 0, canvasWidth, drawHeight);
// Fill the control region with 'white'
fill('white');
rect(0, drawHeight, canvasWidth, controlHeight);
// Get the updated slider values
let bassVal = bassSlider.value();
let trebleVal = trebleSlider.value();
// Normalize the slider values to range -1 to 1
let bassAmount = (bassVal - 50) / 50;
let trebleAmount = (trebleVal - 50) / 50;
// Define frequency range and number of points
let numPoints = 500;
let freqMin = 20;
let freqMax = 20000;
// Define EQ parameters
let f_bass_cutoff = 500;
let f_treble_cutoff = 2000;
let n = 4;
let maxGain = 12; // dB
let gainMin = -15; // dB
let gainMax = 15; // dB
// Begin shape for plotting the frequency response curve
noFill();
stroke(0);
beginShape();
for (let i = 0; i < numPoints; i++) {
let fraction = i / (numPoints - 1);
let freq = freqMin * Math.pow(freqMax / freqMin, fraction);
// Compute lowShelf and highShelf
let lowShelf = 1 / (1 + Math.pow(freq / f_bass_cutoff, n));
let highShelf = 1 / (1 + Math.pow(f_treble_cutoff / freq, n));
// Compute gains
let bassGain_dB = bassAmount * maxGain * lowShelf;
let trebleGain_dB = trebleAmount * maxGain * highShelf;
let totalGain_dB = bassGain_dB + trebleGain_dB;
// Map frequency to x position
let x = map(
Math.log10(freq),
Math.log10(freqMin),
Math.log10(freqMax),
margin,
canvasWidth - margin
);
// Map gain to y position
let y = map(totalGain_dB, gainMin, gainMax, drawHeight - margin, margin);
// Plot the point
vertex(x, y);
}
endShape();
// Draw axes
stroke(150);
// x-axis at y = gain 0 dB
let yZero = map(0, gainMin, gainMax, drawHeight - margin, margin);
line(margin, yZero, canvasWidth - margin, yZero);
// Draw labels
fill(0);
textAlign(CENTER, TOP);
text("Frequency Response", canvasWidth / 2, margin / 2);
// Draw labels for sliders under the sliders
textAlign(CENTER, TOP);
fill(0);
text("Bass", bassSlider.x + bassSlider.width / 2, bassSlider.y + 20);
text("Treble", trebleSlider.x + trebleSlider.width / 2, trebleSlider.y + 20);
}
|
Explanation:
-
Slider Placement: The bass slider is placed on the left side of the control area, and the treble slider is placed on the right side. Both sliders have equal widths, calculated to fit within the canvas with appropriate margins.
-
Slider Labels: The labels for "Bass" and "Treble" are positioned under the sliders by adjusting the text() function parameters in the draw() function.
-
Slider Width Calculation:
| let sliderWidth = (canvasWidth - 3 * margin) / 2;
```
This calculation ensures that both sliders fit side by side within the canvas width, accounting for margins.
- **Slider Positioning:**
- **Bass Slider:**
```javascript
bassSlider.position(sliderLeftMargin, drawHeight + 12);
|
| trebleSlider.position(sliderLeftMargin + sliderWidth + margin, drawHeight + 12);
|
- Label Positioning: The labels are centered under each slider by using:
| textAlign(CENTER, TOP);
text("Bass", bassSlider.x + bassSlider.width / 2, bassSlider.y + 20);
|
- Overall Layout: The control area at the bottom now neatly contains both sliders side by side with labels underneath, improving the user interface and meeting your requirements.
Note: This code should work in a p5.js environment. Feel free to adjust the margins or slider widths if necessary to fit your specific layout preferences.