Image Brief: 3525 Cavity Speaker (8 ohm, 2 W)

Written for a text-to-image model because no suitably licensed photograph of this part was found. The only workspace image of it is a screenshot of a marketplace listing, which is a seller's copyrighted asset and must not be used. Delete this note once the image exists.

Prompt

A single small rectangular enclosed cavity speaker, black plastic box about 35 mm × 25 mm × 7 mm, with a round black speaker grille opening on its face and a white plastic rim, and a twisted pair of red and black wires about 10 cm long ending in a small white two-pin JST PH 2.0 mm connector. Resting flat on a plain white seamless background. Soft, even product-photography lighting. Shot from slightly above at 30 degrees. Sharp focus, high detail, no watermark, no text overlay, no hands, no packaging, no other objects.

Physical details that must be right

• Size: 35 × 25 × about 7 mm ("3525")
• Leads: red/black twisted pair, white 2-pin JST PH 2.0 plug
• Distinguishing marks: the sealed plastic box; this is not an open cone speaker

What it must not look like

• Not a round open-frame cone speaker or a piezo buzzer disc.
• Not a large car-audio or tweeter speaker.

Aspect ratio and size

• Aspect ratio: 4:3 landscape